[cisco-voip] Moving to 10 digit dialing
Mark Holloway
mh at markholloway.com
Tue Dec 20 12:35:13 EST 2011
Sorry, make that $ not ! My brain is in Unix mode today. :)
dial-peer 7 < Support 7 digit dialing
[2-9]......$
dial-peer 10 < Support 10 digit dialing in your area
213[2-9]......$
dial-peer 11 < Support North American Long Distance
1[2-9].........$
On Dec 20, 2011, at 10:33 AM, Mark Holloway wrote:
For clarification, I assume this is for North America? If your area code is 213 you could create the following:
dial-peer 7 < Support 7 digit dialing
[2-9]......!
dial-peer 10 < Support 10 digit dialing in your area
213[2-9]......!
dial-peer 11 < Support North American Long Distance
1[2-9].........!
When your area switches to 10 digit and it is enforced by your telco, you could prepend 213 to the dialed digits in dial-peer 7 if needed.
On Dec 20, 2011, at 9:36 AM, Mike Hyde wrote:
> Is there a way on a CME/UC5** series system to have both 7 and 10 digit dialing? Our area is switching to 10 digit dial next year, so we are looking at configuring the system with both till the cutover is done.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list