[cisco-voip] Unity Connection Distribution lists

[Lelio Fulgenzi]

Not off the top of my head. However, I know that dir handlers can be configured for voice dialing, which should remove the prompt. 

Will have to look tomorrow. 

Sent from my iPhone

On Dec 21, 2011, at 6:41 PM, Corbett Enders <cenders at homesbyavi.com> wrote:

> Works perfectly, thanks.   Second part of the question, any idea how to replace the prompt which says “Spell the first and last name, then press #”.   This is Unity Connection 7.x.
>  
> From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
> Sent: Wednesday, December 21, 2011 4:32 PM
> To: Corbett Enders
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Unity Connection Distribution lists
>  
> Try creating a dir handler that searches partitions. 
> 
> Sent from my iPhone
> 
> On Dec 21, 2011, at 6:31 PM, Corbett Enders <cenders at homesbyavi.com> wrote:
> 
> I completely missed the check box when creating the Distribution list that was “Allow Contacts”.   I have enabled it and saved the setting. However, when I click the “Add contacts” button I get  “Found 0 Contact(s) That Can Be Added to List”
>  
> From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
> Sent: Wednesday, December 21, 2011 3:47 PM
> To: Corbett Enders
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Unity Connection Distribution lists
>  
> Contacts are the way to go, although you lose some functionality when you use contact vs. mailbox. 
>  
> It's been a while since I looked at it, but not sure if there's anything special on the directory handler config to say look at contacts. 
> 
> Sent from my iPhone
> 
> On Dec 21, 2011, at 5:14 PM, Corbett Enders <cenders at homesbyavi.com> wrote:
> 
> Hello list,
>  
> I am looking for a way of building a “dial by name” directory in Unity Connection for phone numbers that don’t exist at mailboxes in Unity. I’ve created a Directory Handler, which looks to a Distribution List… however, I thought I’d be able to add Contacts to this list but that isn’t possible.  Do I need to create empty mailboxes (set to not accept messages) for this purpose or is where some better way?
>  
> Also, then can I change the Directory Handler prompt to not say “spell the first and last name” as ideally I really need it to say “Spell the community name”…
>  
> Corbett.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111221/18a917f5/attachment.html>