[cisco-voip] how do calling party transformations work anyways?

Mike Lydick mike.lydick at gmail.com
Fri Dec 23 12:41:27 EST 2011


So are you trying to localized the calling number? Just for the phone
display. This will be applied to the phone.
2 setting, the latter disables or ignores the first.

Calling party Transformation CSS drop down
Use device Pool Calling Party Transformation

My experience is that older generation phones do not support this feature
or not consistently. Spent quite a few hrs on with TAC trying to get this
to work with 7941/7961/7921 and had varied results. 79x2 -79x5 this works
well.

The transformation affects just the display not the routing. So in this
case the call logs will show the actual number (Missed/Received calls).

There is
Best Regards,

Mike Lydick




On Fri, Dec 23, 2011 at 12:27 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Haven't tried it on the GW, not sure I want to touch those.
>
> The fact that you can select the "external calling mask" makes me to
> believe that it is the devices calling party information it sends out that
> is affected.
>
> ugh.
>
> Will have to worry about this in the new year...
>
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ------------------------------
> *From: *"paul dial" <dialp at ucar.edu>
> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca>
> *Cc: *cisco-voip at puck.nether.net
> *Sent: *Friday, December 23, 2011 12:20:14 PM
>
> *Subject: *Re: [cisco-voip] how do calling party transformations work
> anyways?
>
> Agreed, very confusing.  They use the word "localize" in the Help-> This
> Page doc for phone configuration, which makes me believe its transforming
> the calling party that is displayed when someone calls this device.  Does
> the transform work on the GW?
>
> paul
>
> On 12/23/2011 9:58 AM, Lelio Fulgenzi wrote:
>
> I guess that's the question, does this transformation transform the
> calling party mask this device uses to make outbound calls, or the calling
> party that is displayed when someone calls this device.
>
> So confusing.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ------------------------------
> *From: *"paul dial" <dialp at ucar.edu> <dialp at ucar.edu>
> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca> <lelio at uoguelph.ca>
> *Cc: *cisco-voip at puck.nether.net
> *Sent: *Friday, December 23, 2011 11:52:28 AM
> *Subject: *Re: [cisco-voip] how do calling party transformations work
> anyways?
>
> I believe the Calling party transformation on the phone is used to
> localize the calling party number for an external call coming into your
> phone system.  I'm guessing here, but I think you want to localize the
> calling number for an internal to external call, in which case you'd want
> to apply it on the GW.
>
> If the remote destination is still an IP phone under your control, then I
> think applying the transform to the phone would work.
>
> paul
>
> On 12/23/2011 9:23 AM, Lelio Fulgenzi wrote:
>
> Turns out you can apply it to the device (phone), but I can't seem to get
> it working. Not sure if my upstream configs are overwriting it or not
> though.
>
> I will have to do some more troubleshooting......ugh, I haven't looked at
> CallManager traces in forever.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ------------------------------
> *From: *"paul dial" <dialp at ucar.edu> <dialp at ucar.edu>
> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca> <lelio at uoguelph.ca>
> *Cc: *cisco-voip at puck.nether.net
> *Sent: *Friday, December 23, 2011 11:20:56 AM
> *Subject: *Re: [cisco-voip] how do calling party transformations work
> anyways?
>
> You can apply the calling party transformation on the Device Pool or  (at
> least for MGCP GW) in the "Call Routing Information - Outbound Calls"
> section of the gateway configuration page.  There might be other locations
> too, but I think you'd want to put it as close to the destination as
> possible, the idea being that if you have a different local calling number
> presentation standard (i.e. 7 vs 10 digits, etc) at your remote
> destinations, you can customize for each remote location.
>
> paul
>
> On 12/23/2011 8:43 AM, Lelio Fulgenzi wrote:
>
> sorry, i guess the question should read, where do i apply the CSS that
> contains the partition that contains the transformations.
>
>
>
>
> ------------------------------
> *From: *"Lelio Fulgenzi" <lelio at uoguelph.ca> <lelio at uoguelph.ca>
> *To: *cisco-voip at puck.nether.net
> *Sent: *Friday, December 23, 2011 10:42:22 AM
> *Subject: *[cisco-voip] how do calling party transformations work anyways?
>
> OK, still on this remote destination kick, trying to see how we can make
> things a bit better.
>
> I'd like to be able to display the extension on the remote destination
> rather than the external calling mask (which is the same for everybody).
>
> I was thinking of using a calling party transformation mask, but I can't
> seem to find where to apply the darn thing. If I have to create a
> transformation for each remote destination, I might be able to live with
> that, but I just wanna see it work for now.
>
> Going to CCO now....
>
> Any ideas in the meantime?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> --
> ----
> Paul Dial
> Network Engineer
> National Center for Atmospheric Research303-497-1261dialp at ucar.edu
>
>
> --
> ----
> Paul Dial
> Network Engineer
> National Center for Atmospheric Research303-497-1261dialp at ucar.edu
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111223/a78e9ee7/attachment.html>


More information about the cisco-voip mailing list