[cisco-voip] broadcast shared line hunt group

[cips]

Update, followed by a reset should work in most cases ;-)

Btw, when using broadcast you shouln't have to use share lines anymore ;-)

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of mark bunch
Sent: donderdag 3 februari 2011 10:52
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] broadcast shared line hunt group

 

Hey all,

 

I have configure a hunt group that includes 2 extensions that are shared
lines, 2000 is configured on half the phones and 2001 is configured on the
other half, 2003 is the hunt group pilot number, the hunt group is
configured to broadcast to 2000 and 2001.

 

The problem is that the hunt group does not broadcast to the these listed
extensions, it processes the extensions top-down?

 

Have anyone run into this problem before and if what was the workaround.

 

CUCM is version 7.0

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110203/2415dd5a/attachment.html>