[cisco-voip] Number of rings before it goes to voicemail
Scott Voll
svoll.voip at gmail.com
Fri Feb 4 14:42:54 EST 2011
I'm pretty sure a screen flash will happen with the ring time change.
But it does NOT have to be cluster wide. You can change the time on a per
DN basis under the line settings.
Ring time should be Cluster based. so if you had a second cluster.... it
would not affect the other.
Scott
On Fri, Feb 4, 2011 at 11:37 AM, Bellerose, Robert <
Robert.Bellerose at analog.com> wrote:
> Hi
>
> I know the ring cycle for CUCM rel 7 is cluster wide, we currently show 18
> secs but the actual rings before it goes to vmail is two, if we change the
> timer to extend the ring cycles to 3 or 22secs for forwarding to voicemail
> do the phones need to be reset or restarted for it to take affect? Also do
> all the clusters have to be changed to match or can the one cluster take the
> change and only affect the phones registered to it?
>
> Thanks
>
> Rob
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110204/1410b6c1/attachment.html>
More information about the cisco-voip
mailing list