[cisco-voip] E1 trunk

[Paul]

Use a voip dial-peer.

If user dials X, then session target ipv4:<HQboxip>

make sure you have enough DSPs to transcode sessions across the WAN.

This of course brings the question...what the heck is the HQ running?



________________________________
From:Cisco Voip <cisco_newbie at yahoo.com>
To:cisco-voip at puck.nether.net
Sent: Mon, February 7, 2011 10:53:14 AM
Subject: [cisco-voip] E1 trunk


Hi all.
 
Our customer came up with requirement. They have 1 head office and 3 branches. 
All 3 branches are using CME. Headoffice has taken E1 from local telco. Now the 
requirement is,
 
When any person in any of 3 branches, dials 9 (access code), one of the E1 
channels should be allocated to him !!! (if none are free, then he should hear 
busy tone)
 
Is this even possible ? how can a remote CME router can do that ?



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110207/92f37007/attachment.html>