[cisco-voip] cube g729 codec

[Buchanan, James]

Hello,

I don't see a line where the codec is forced.

Thanks,

James Buchanan | Technology Manager, UC | South Region | Presidio Networked Solutions
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com<mailto:jbuchanan at ctiusa.com>
D: 615-866-5729 | F: 615-866-5781 | www.presidio.com<http://www.presidio.com/>
CCIE #25863, Voice


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Noel Yabao
Sent: Thursday, February 10, 2011 6:26 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] cube g729 codec

Hi,

I was wondering why a 3745 cube would show g729ar8 and not the configured g729r8
on the "show call active voice compact" result.

#AS5400
   3082649 ANS     T11     g729r8      TELE  P4267
   3082650 ORG     T11     g729r8      VOIP  2874  10.10.10.16:17956<http://10.10.10.16:17956>

#3745
         9 ANS     T11    g729ar8     VOIP        P4267  192.168.0.120:17314<http://192.168.0.120:17314>
        10 ORG     T11    g729r8      VOIP        P2874     172.16.10.27:2344<http://172.16.10.27:2344>


I have forced g729r8 on all peers.  Below is my setup.

AS5400 --> 3745 --> avaya

---------------------------------------------
#AS5400 (192.168.0.120)
dial-peer voice 1 voip
 destination-pattern 2874
 progress_ind setup enable 3
 session target ipv4:10.10.10.16
 dtmf-relay h245-alphanumeric
 no vad

#3745 (10.10.10.16)
dial-peer voice 1 voip
 destination-pattern 2874
 session target ipv4:172.16.10.26
 incoming called-number 2874
 dtmf-relay h245-alphanumeric
 no vad

flash:c3745-adventerprisek9-mz.124-15.T8.bin

#AVAYA control (172.16.10.26)
#AVAYA media (172.16.10.27)
----------------------------------------------------

Also attached is the h245 asn1 debug.


Is there a way to correct this?



Thanks and Regards.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110210/c418155d/attachment.html>