[cisco-voip] dial peer question

ccieid1ot ccieid1ot at gmail.com
Thu Feb 10 12:38:40 EST 2011


Could be a bug, try csim start and the 10 digit pattern.

csim start 303.......

On Thu, Feb 10, 2011 at 11:29 AM, Aaron Quin <aquin at ibrtek.com> wrote:

> I tried removing the prefix from the last email and still nothing.  If I
> write a rule that’s destination-pattern 911 and run 'show dialplan number
> 911' and it says no matches  I have tried several other patters like 9T
> 9.........., etc and so far I can't get it to match any number outbound.
>  The 2 transition rules were just for testing to make sure it worked.  Am I
> just doing something fundamentally wrong?
>
> -----Original Message-----
> From: Paul [mailto:asobihoudai at yahoo.com]
> Sent: Thursday, February 10, 2011 10:23 AM
> To: Aaron Quin; Joel Perez
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] dial peer question
>
>
> The simple answer here is that you don't have a destination-pattern that
> matches
> '3035551212' which is why IOS is saying there's no match for the number.
> Also I'm a little puzzled why you've configured two translation rules for
> 2203
> and 2201. If I'm correct, you've configured two rule sets that say change
> 2203
> to 2203 and 2201 to 2201.
>
>
>
> ________________________________
> From:Aaron Quin <aquin at ibrtek.com>
> To:Joel Perez <tman701 at gmail.com>
> Cc:"cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
> Sent: Thu, February 10, 2011 9:10:13 AM
> Subject: Re: [cisco-voip] dial peer question
>
>
> Ok, here is my config’s dial peer section sections, and the wacky section
> is
> that the inbound works fine, I can call my did numbers for the configured 2
> stations and they work great, but nothing works outbound.  If I do a show
> dialplan number 3035551212 it says no match for any number I try.  Sorry
> for the
>
> long config I cut my VPN stuff out
>
> !
> !
> voice translation-rule 1
>  rule 1 /^2203$/ /2203/
> !
> voice translation-rule 2
>  rule 1 /^2201$/ /2201/
> !
> !
> voice translation-profile Angela_Inbound_2
>  translate called 2
> !
> voice translation-profile Spaceco_Inbound_1
>  translate called 1
> !
> !
> controller T1 0/2/0
>  cablelength long 0db
>  pri-group timeslots 1-24
>  description XO_PRI
> !
> !
> !
> !
> !
> interface GigabitEthernet0/0
>  no ip address
>  duplex full
>  speed 100
> !
> interface GigabitEthernet0/0.10
>  encapsulation dot1Q 10
>  ip address 10.1.2.1 255.255.255.0
> !
> interface GigabitEthernet0/0.50
>  encapsulation dot1Q 50
>  ip address 10.1.1.1 255.255.255.0
>  ip nat inside
>  ip virtual-reassembly
> !
> interface GigabitEthernet0/1
>  description $ETH-WAN$
>  ip address XX.XX.XX.XX 255.255.255.224
>  ip nat outside
>  ip virtual-reassembly
>  duplex full
>  speed 100
>  crypto map SDM_CMAP_1
> !
> interface Serial0/2/0:23
>  description XO_PRI
>  no ip address
>  encapsulation hdlc
>  isdn switch-type primary-ni
>  isdn incoming-voice voice
>  no cdp enable
> !
> interface Integrated-Service-Engine1/0
>  ip address 192.168.100.1 255.255.255.252
>  service-module ip address 192.168.100.2 255.255.255.252
>  !Application: CUE Running on NME
>  service-module ip default-gateway 192.168.100.1
>  no keepalive
> !
> voice-port 0/2/0:23
>  description XO_PRI
> !
> voice-port 0/3/0
> !
> voice-port 0/3/1
> !
> voice-port 0/3/2
> !
> voice-port 0/3/3
> !
> !
> !
> !
> !
> dial-peer voice 5000 voip
>  destination-pattern 5000
>  session protocol sipv2
>  session target ipv4:192.168.100.2
>  dtmf-relay sip-notify
>  codec g711ulaw
>  no vad
> !
> dial-peer voice 2 pots
>  description Aaron_Inbound
>  translation-profile incoming Spaceco_Inbound_1
>  incoming called-number 2203
>  direct-inward-dial
>  port 0/2/0:23
> !
> dial-peer voice 3 pots
>  description Angela Inbound
>  translation-profile incoming Angela_Inbound_2
>  incoming called-number 2201
>  direct-inward-dial
>  port 0/2/0:23
> !
> dial-peer voice 1 pots
>  destination-pattern 9[2-9].........
>  port 0/2/0:23
>  prefix 9
> !
> !
> !
> !
> telephony-service
>  no auto-reg-ephone
>  authentication credential administrator c at ng3t1n
>  max-ephones 45
>  max-dn 100
>  ip source-address 10.1.2.1 port 2000
>  calling-number initiator
>  url services http://phone-xml.berbee.com/menu.xml
>  url authentication http://192.168.100.1/CCMCIP/authenticate.asp
>  load 7960-7940 P00308000500
>  load 7965 SCCP45.8-5-4S
>  time-zone 6
>  voicemail 5000
>  max-conferences 8 gain -6
>  moh flash:/music-on-hold.au
>  web admin system name administrator secret 5
> $1$DOsT$6q3CUwQ8s9RlQdM4o.Y4a/
>  dn-webedit
>  time-webedit
>  transfer-system full-consult
>  directory entry 1 303-475-1614 name Aaron Cell
>  create cnf-files version-stamp 7960 Feb 09 2011 09:13:19
> !
> !
> ephone-dn  1  dual-line
>  number 2202
>  pickup-group 1101
>  description Jill
>  name Jill Kreissler
>  call-forward busy 5000
>  call-forward noan 5000 timeout 10
> !
> !
> ephone-dn  2  dual-line
>  number 1269
>  pickup-group 1101
>  description Kenneth
>  name Kenneth Ryckeley
>  call-forward busy 5000
>  call-forward noan 5000 timeout 10
> !
> !
> ephone-dn  3  dual-line
>  number 2203
>  pickup-group 1101
>  description Aaron
>  name Aaron Quin
>  call-forward busy 5000
>  call-forward noan 5000 timeout 10
> !
> ephone-dn  4  dual-line
>  number 2201
>  pickup-group 1101
>  description Angela
>  name Angela Kirkpatrick
>  call-forward busy 5000
>  call-forward noan 5000 timeout 10
> !
> !
> ephone-dn  5  dual-line
>  number 1266
>  pickup-group 1101
>  description Darcy
>  name Darcy Firkus
>  call-forward busy 5000
>  call-forward noan 5000 timeout 10
> !
> !
> ephone-dn  6  dual-line
>  number 1260
>  pickup-group 1101
>  description Connie
>  name Connie Chang
>  call-forward busy 5000
>  call-forward noan 5000 timeout 10
> !
> !
> ephone-dn  7  dual-line
>  number 10000
>  label Aaron Ephone
>  call-forward busy 5000
> !
> !
> ephone-dn  8  dual-line
>  number 8511
>  label Jennifer Byrd
>  name Jennifer Byrd
>  call-forward busy 5000
>  call-forward noan 5000 timeout 10
> !
> !
> ephone-dn  31
>  number 3001
>  park-slot timeout 30 limit 3
> !
> !
> ephone-dn  32
>  number 3002
>  park-slot timeout 30 limit 3
> !
> !
> ephone-dn  33
>  number 3003
>  park-slot timeout 30 limit 3
> !
> !
> ephone-dn  34
>  number 3004
>  park-slot timeout 30 limit 3
> !
> !
> ephone-dn  35
>  number 3005
>  park-slot timeout 30 limit 3
> !
> !
> ephone-dn  99
>  number 5001....
>  mwi off
> !
> !
> ephone-dn  100
>  number 5002....
>  mwi on
> !
> !
> ephone  1
>  device-security-mode none
>  mac-address 0012.0138.3D44
>  username "Jill" password auy81781
>  type 7960
>  button  1:1
> !
> !
> !
> ephone  2
>  device-security-mode none
>  mac-address 000D.299D.3D8C
>  username "Kenneth" password dpe85133
>  type 7960
>  button  1:2
> !
> !
> !
> ephone  3
>  device-security-mode none
>  mac-address D057.4CF7.8EC0
>  username "aquin" password password
>  speed-dial 1 1269 label "test"
>  type 7965
>  button  1:3
> !
> !
> !
> ephone  4
>  device-security-mode none
>  mac-address 0013.7F38.9E24
>  username "Angela" password ypb04473
>  type 7960
>  button  1:4
> !
> !
> !
> ephone  5
>  device-security-mode none
>  mac-address D057.4CF7.91F8
>  username "darcy" password spv27189
>  type 7965
>  button  1:5
> !
> !
> !
> ephone  6
>  device-security-mode none
>  mac-address 0016.46CB.5115
>  username "connie" password 123456
>  type 7960
>  button  1:6
> !
> !
> !
> ephone  7
>  device-security-mode none
>  mac-address 001D.0939.026C
>  type CIPC
>  button  1:7
> !
> !
> !
> ephone  8
>  device-security-mode none
>  mac-address 0014.A923.950E
>  username "jbyrd"
>  type 7960
>  button  1:8
> !
> !
> !
>
>
>
> From:Joel Perez [mailto:tman701 at gmail.com]
> Sent: Thursday, February 10, 2011 9:34 AM
> To: Aaron Quin
> Cc:cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] dial peer question
>
> We need some more info to know what is going on.
> Where are you running the test from, etc....
> Pasting the config would help.
>
> Joel P
> On Thu, Feb 10, 2011 at 10:53 AM, Aaron Quin <aquin at ibrtek.com> wrote:
> I have a question and I’m hoping somebody can help, cause I’m stumped.  I’m
> doing a new installation into an existing site with a PRI and no matter how
> I
> write the outbound dial peers, nothing matches.  I can even create one
> that’s a
> full number like 303xxxxxxx and when I test it it says no match.  I also
> tried
> it for 911 too, if I set up a dial peer for 911, and then dial 911 it
> doesn’t
> match.  I can post my config if somebody wants it, but anybody have any
> ideas?
>
> Aaron Quin
> Spaceco Business Solutions
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
duy
CCIE #27737 Voice
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110210/666021ba/attachment.html>


More information about the cisco-voip mailing list