[cisco-voip] Problem install CUCM in ESX server

[H, Tim]

Is your ISO bootable? or did you download this off of the web site?

Also, if you're spinning the disc from you local hard drive, you'll need to:
- turn the VM on
- mount the ISO within the VMWare window
- Reset the VM
- Hit "Esc" when you see the VMWare window flash
- Choose the CDROM for booting to

Thanks,
Tim

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ignacio Lorenzo
Sent: Thursday, February 10, 2011 12:26 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Problem install CUCM in ESX server

Hi,

I´m trying to install CUCM 6.1 in ESX Server but I have a problem because when I boot from CD (iso), the installation is not starting. Somebody has had a similar problem.

Thanks

Ignacio Lorenzo Domínguez
Ingeniero de Redes y Comunicaciones
C / Alejandro Rodríguez, 32 - 28039 Madrid
Tel. 91 311 04 87  Fax: 91 311 93 86

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110210/10e33a12/attachment.html>