[cisco-voip] Problem install CUCM in ESX server

[Johnny.Crothers at datacraft.co.nz]

Also check that the CDROM has the "Connected" box ticked in the VMWare console under "Edit Settings"

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of H, Tim
Sent: Friday, February 11, 2011 7:23 AM
To: Ignacio Lorenzo; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Problem install CUCM in ESX server

 

Is your ISO bootable? or did you download this off of the web site?

 

Also, if you're spinning the disc from you local hard drive, you'll need to:

- turn the VM on

- mount the ISO within the VMWare window

- Reset the VM

- Hit "Esc" when you see the VMWare window flash

- Choose the CDROM for booting to

 

Thanks,

Tim

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ignacio Lorenzo
Sent: Thursday, February 10, 2011 12:26 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Problem install CUCM in ESX server

 

Hi,

 

I´m trying to install CUCM 6.1 in ESX Server but I have a problem because when I boot from CD (iso), the installation is not starting. Somebody has had a similar problem.

 

Thanks 

 

Ignacio Lorenzo Domínguez

Ingeniero de Redes y Comunicaciones

C / Alejandro Rodríguez, 32 - 28039 Madrid

Tel. 91 311 04 87  Fax: 91 311 93 86

 



*****************************************************************************
This email and all contents are subject to the following disclaimer:

http://www.datacraft-asia.com/disclaimer
*****************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110211/87dd3223/attachment.html>