[cisco-voip] IP Communicator Bug or WAD

[Scott Voll]

So I'm troubleshooting why my Corporate Directory does not work (10 digits
from AD LDAP)

If I pick up the 7962 and dial 5031  the 7961 hits the 5XXX translation
pattern and goes to VM.  BUT if I enter 5031234567 and press Dial, it hits
the 503123.4567 translation pattern and dials correctly the 4567.  Both
Translation patterns are in the None partition.



BUT if I do the same thing on the IP communicator client weather I pick up
and dial or enter and dial it hits the 5XXX translation because it dials the
numbers one digit at a time rather than the full 10 digits like the 7961.



Looks to be a Bug with the IPC client or is it Working As Designed?



Ultimately I’m trying to dial the 10 digits from Corporate directory which
gets the 10 digits from AD LDAP.


Any idea of a work around?  I


TIA


Scott


PS.  CM 7.1.5, IPC 7.0.5.1, 7961 running 9.0.3S
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110211/987cfe9c/attachment.html>