[cisco-voip] IP Communicator Bug or WAD

[Ryan Ratliff]

It's a matter of whether the digits are sent enbloc or not.  I don't believe CIPC supports enbloc so it will always send digits one at a time (just like other phones do when dialing offhook) and thus will always hit your 5XXX translation pattern.

-Ryan

On Feb 11, 2011, at 10:27 AM, Scott Voll wrote:

So I'm troubleshooting why my Corporate Directory does not work (10 digits from AD LDAP)

If I pick up the 7962 and dial 5031  the 7961 hits the 5XXX translation pattern and goes to VM.  BUT if I enter 5031234567 and press Dial, it hits the 503123.4567 translation pattern and dials correctly the 4567.  Both Translation patterns are in the None partition.

 
BUT if I do the same thing on the IP communicator client weather I pick up and dial or enter and dial it hits the 5XXX translation because it dials the numbers one digit at a time rather than the full 10 digits like the 7961.

 
Looks to be a Bug with the IPC client or is it Working As Designed?

 
Ultimately I’m trying to dial the 10 digits from Corporate directory which gets the 10 digits from AD LDAP.



Any idea of a work around?  I



TIA



Scott



PS.  CM 7.1.5, IPC 7.0.5.1, 7961 running 9.0.3S

 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110211/c3e0cf3e/attachment.html>