[cisco-voip] Caller ID FXO Port

[David Zhars]

Call Manager 8.0.  MGCP 2801 Router.  Line comes in to first FXO port, we
have Caller ID on the line.

In CM, I have "Enable Caller ID" set under device information.

Yet all calls come in without caller ID (just "External Call - Unknown
Number" shows up on the phones).

Is there a way to see if the 2801 gets the Caller ID?  Or any other
troubleshooting I can do?

Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110211/6f7001f3/attachment.html>