[cisco-voip] Caller ID FXO Port

[David Zhars]

Hmmm..no I have not!  I did not know if I had to do this with the router
being in MGCP mode.
Are the commands the same as for a H323 setup?

On Fri, Feb 11, 2011 at 1:17 PM, Paul <asobihoudai at yahoo.com> wrote:

> Have you configured the FXO port on the router for caller ID?
>
>
>
> ________________________________
> From:David Zhars <dzhars at gmail.com>
> To:cisco-voip at puck.nether.net
> Sent: Fri, February 11, 2011 9:47:04 AM
> Subject: [cisco-voip] Caller ID FXO Port
>
> Call Manager 8.0.  MGCP 2801 Router.  Line comes in to first FXO port, we
> have
> Caller ID on the line.
>
> In CM, I have "Enable Caller ID" set under device information.
>
> Yet all calls come in without caller ID (just "External Call - Unknown
> Number"
> shows up on the phones).
>
> Is there a way to see if the 2801 gets the Caller ID?  Or any other
> troubleshooting I can do?
>
> Thanks.
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110211/93c451ac/attachment.html>