[cisco-voip] CallManager 8.0(3) DND on 7942/SCCP shows ???

[Jason Aarons (US)]

I just noticed the sccp load is 8.3(2S) a little old, would have to go to 8.5(2) then 9.0X

-----Original Message-----
From: Paul [mailto:asobihoudai at yahoo.com] 
Sent: Wednesday, February 16, 2011 11:47 AM
To: Jason Aarons (US); cisco-voip <(cisco-voip at puck.nether.net)>
Subject: Re: [cisco-voip] CallManager 8.0(3) DND on 7942/SCCP shows ???

What's the firmware version on the phone? I've got 9-1-1 on a 7962 using DND with 8.0.3a without issue. I've installed the latest devpack which was released around the end of January.


________________________________
From:Jason Aarons (US) <jason.aarons at us.didata.com> To:"cisco-voip (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net>
Sent: Wed, February 16, 2011 8:32:04 AM
Subject: [cisco-voip] CallManager 8.0(3) DND on 7942/SCCP shows ???


I configured a Softkey Template for Onhook for DND.
 
When I walk up to the SCCP/7942 and press DND I get “???” on the left side of screen (similar to where You Have Voicemail would show)
 
The Common Phone Profile has Turn Ringer Off and Device Phone I’ve played with no luck. Unity Connection 8.5 is a SIP trunk if that matters…but turning off the 

ringer via DND should be a phone thing..
 
Using CallManager 8.0;
 
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fsdnd.html#wp1079981


      

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.