[cisco-voip] Looking for Voip call generator/tester

[Wes Sisk]

Consider remote controlling phones to generate load.  You could even use 
something like UCCX to automtically place calls to phones and have those 
phones configured to auto answer.  When the call ends the phone 
endpoints send call statistics back to CM so long as they are enabled by 
CM service parameters.

Alternatively the IP-SLA feature in IOS can help to monitor link quality.

I believe Agilent used offer this in a product-ized version called 
"Voice Quality Tester".

Regards,
Wes

On 2/23/2011 10:19 AM, Andrew Yerofyeyev wrote:
> Hello Team,
>
>
> We are looking for software which can simulate and provide various
> statistics like packet loss / MOS / jitter , etc for various amount
> (1-400) of simultaneous voip calls between point A in our network and
> point B on customer network.
>
>
> Any advises will be highly appreciated.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110223/1bbfad1e/attachment.html>