[cisco-voip] CUCM 7/8 inbound call blocking

[Mike Thompson]

Paul, 
    That would work for targeting cLled number and modifying the corresponding calling party number, but that's it
     The only effective way I know is using an H323 gateway, but it's not scalable.  The 'proper way' is to use contact center, I think The IVR module, but don't quote me on that part. 

Sent from my phone, apologies for any typos.

On Feb 27, 2011, at 4:12 PM, Paul <asobihoudai at yahoo.com> wrote:

> 
> Use translation patterns and then block based on the CLID...this is what I 
> remember reading somewhere.....
> 
> 
> 
> ________________________________
> From:Cisco Voip <cisco_newbie at yahoo.com>
> To:cisco-voip at puck.nether.net
> Sent: Sun, February 27, 2011 12:02:55 PM
> Subject: [cisco-voip] CUCM 7/8 inbound call blocking
> 
> 
> Hi all, 
> 
> My query is very simple, pls take out some time to help me. 
> 
> In Cucm 7/8, can i block inbound call based on caller-id ? i can do this on 
> gateway i know. I just want to know that does cucm provides any feature of doing 
> 
> it ? i read on cisco netpro that CUCM takes decision based on called number and 
> not caller-id. So can some one tell me ?
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip