[cisco-voip] R: ATA187 Vs CUCME 8.5

[Alessandro Bertacco (Tin)]

Thank you, I tryed, but doesn't working.

 

Any other Idea?

 

Thank you

 

regards

 

Alessandro

 

Da: Adam Frankel (afrankel) [mailto:afrankel at cisco.com] 
Inviato: sabato 26 febbraio 2011 19:57
A: kpyib at tin.it
Cc: cisco-voip at puck.nether.net
Oggetto: Re: [cisco-voip] ATA187 Vs CUCME 8.5

 

You could try configuring it as a SIP Trunk  to SCCP CME as Steve Holl points out here:

https://supportforums.cisco.com/message/3191687

 
Haven't tried it myself.

Adam 


------------Original Message--------------
From: kpyib at tin.it  <mailto:kpyib at tin.it> <kpyib at tin.it>
Sent: Sat, Feb 26, 2011 5:40:22 Am
To: cisco-voip at puck.nether.net
CC: 
Subject: [cisco-voip] ATA187 Vs CUCME 8.5 

 Hi Guys, I've a big problem, I need to configure four ATA187 on CUCME 8.5, but Cisco telle me that ATA187 wich replaced old ATA186 (End of Sale) is supported only in CUCM 7.1.3 and later release
Is not supported in CUCME 8.5. There will be supporte in CUCME 8.7, in middle 2011.

Do you know workaround to configure now ATA187?

"voice register global" with "mode cme" doesn't work

thank you.

Regards

Alessandro Bertacco



 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110228/417a6303/attachment.html>