[cisco-voip] ATA187 Vs CUCME 8.5

[Adam Frankel (afrankel)]

You could try configuring it as a SIP Trunk  to SCCP CME as Steve Holl 
points out here:

https://supportforums.cisco.com/message/3191687

Haven't tried it myself.

Adam


------------Original Message--------------
From: kpyib at tin.it <kpyib at tin.it>
Sent: Sat, Feb 26, 2011 5:40:22 Am
To: cisco-voip at puck.nether.net
CC:
Subject: [cisco-voip] ATA187 Vs CUCME 8.5
>  Hi Guys, I've a big problem, I need to configure four ATA187 on CUCME 
> 8.5, but Cisco telle me that ATA187 wich replaced old ATA186 (End of 
> Sale) is supported only in CUCM 7.1.3 and later release
> Is not supported in CUCME 8.5. There will be supporte in CUCME 8.7, in 
> middle 2011.
>
> Do you know workaround to configure now ATA187?
>
> "voice register global" with "mode cme" doesn't work
>
> thank you.
>
> Regards
>
> Alessandro Bertacco
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110226/2c2a063e/attachment.html>