[cisco-voip] Fwd Voicemail to Email

[David Zhars]

Unity Connection.
So dumb question, I tried entering my mailserver name as a smart host, and I
tried using smtp.comcast.net as a smart host.  Set the voicemail to Relay.
Both times, I get a receipt in my voicemail box, error code 500, that the
message could not be delivered.

I guess I don't understand enough about smarthosts!

Anyone else?

On Tue, Jan 4, 2011 at 8:06 AM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

>  Unity or Unity Connection?
>
>
>
> In regular unity you’d have to be in UM Mode, In UCxN, setup a smart host
> under SMTP and then in message actions for each users  either accept and
> relay (keep copy on server) or just relay the message.
>
>
>
> *Matthew Loraditch, CCVP, CCNA, CCDA*
> 1965 Greenspring Drive
>
> Timonium, MD 21093
> support at heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com
> Support Issue? Email support at heliontechnologies.com for fast assistance!
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *David Zhars
> *Sent:* Tuesday, January 04, 2011 9:00 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Fwd Voicemail to Email
>
>
>
> Unity 8.
>
> I saw someone do this, when a person gets a call, the call is converted to
> wav then sent to their email.
>
> I can't seem to find where to do this in Unity.
>
> Caveats:
>
> the domain listed in Unity (VMAIL-001) is not the email domain that I would
> use.
> My email server requires SMTP authentication (username and password).
>
> I am pretty sure it can be done (we did it in 6 I think, but I can't find
> the right settings in 8).
>
> Thanks anyone
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110104/36e0179e/attachment.html>