[cisco-voip] Dialing Problem

[Dew Swen]

Did you test with dialed number analyzer?

Are the correct dial peers triggered?

Regards,
Dew Swen.



On 05.Oca.2011, at 22:21, Lisa Notarianni <notariannil1 at scranton.edu>  
wrote:

> CUCM Version 7.1.2.20000-2...
>
> We have a VG-224 with a line that is used to auto dial a toll free  
> number nightly.  Ever since we placed the line on the VG-224 it  
> cannot dial out. (It was formerly a POTS line.)  As soon as 9+1 is  
> dialed,  it errors out.  However, when I add the line to a VoIP,  I  
> can dial the toll free number so it seems that the Route Patterns  
> are ok.
>
> Any ideas?
>
> Thanks,
>
> Lisa
>
>
> -- 
> <LNsignature.jpg>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip