[cisco-voip] Fwd Voicemail to Email

[David Zhars]

DNS...  D'oh!  All better now.

On Friday, January 7, 2011, Lewis, Chris <Chris.Lewis at magnetar.com> wrote:
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> As  Matthew said below, you need to set up a
> Smarthost.  You may also have to
> make a change to your Mail server to relay the messages also.
>
>
>
> You don’t need to change the SMTP Domain
> from the server name either – or at least I haven’t.
>
>
>
> The Search IP Address List  - is to allow/block IP Addresses –
> at least that’s what the Help says – I haven’t had the need
> to play with it.
>
>
>
> I have a Doc somewhere and will forward it if
> I find it – had it from one of the Cisco guys a while back.
>
>
>
> Chris
>
>
>
>
>
> From:
> cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Zhars
> Sent: 06 January 2011 20:55
> To: Dana Tong;
> cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Fwd
> Voicemail to Email
>
>
>
>
>
> I want Unity Conn to just
> email the message out to my end user.    (In UConn, it is under
> the subscriber, Edit -> Message Actions -> Voicemail.  Choose
> "Relay the Message" should send it to an email address.)
>
> Under SMTP, the SMTP domain is listed as UConn-VM, which I don't know if it
> matters or not!  Should it be set to "mycompany.com"?
> Also, under Edit is a "Search IP Address List", not sure of what that
> does.
>
> The documentation is just a little lacking on this part, IMHO.
>
> Dave
>
>
>
> On Tue, Jan 4, 2011 at 5:39 PM, Dana Tong <Dana.Tong at ivision.com.au>
> wrote:
>
>
>
>
>
> Dumb question
> but have you setup the SMTP server values also? And what settings do you have
> in the Message Settings or the Unified Messaging section?
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]
> On Behalf Of David Zhars
> Sent: Wednesday, 5 January 2011
> 4:27 AM
> To: Matthew Loraditch; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Fwd
> Voicemail to Email
>
>
>
>
>
>
>
> Unity Connection.
> So dumb question, I tried entering my mailserver name as a smart host, and I
> tried using smtp.comcast.net
> as a smart host.  Set the voicemail to Relay.  Both times, I get a
> receipt in my voicemail box, error code 500, that the message could not be
> delivered.
>
> I guess I don't understand enough about smarthosts!
>
> Anyone else?
>
>
>
> On Tue, Jan 4, 2011 at 8:06 AM, Matthew Loraditch <MLoraditch at heliontechnologies.com>
> wrote:
>
>
>
>
>
> Unity or Unity
> Connection?
>
>
>
> In regular unity
> you’d have to be in UM Mode, In UCxN, setup a smart host under SMTP and
> then in message actions for each users  either accept and relay (keep copy
> on server) or just relay the message.
>
>
>
> Matthew Loraditch,
> CCVP, CCNA, CCDA
> 1965 Greenspring Drive
>
>
>
>
>
> The information contained in this message and its attachments
> is intended only for the private and confidential use of the
> intended recipient(s).  If you are not the intended recipient
> (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized
> copying, disclosure or distribution of the material in this e-
> mail is strictly prohibited.
>
>
>
>
>