[cisco-voip] Advice swapping Sip over internet to T1

[Max Pierson]

I've always defined a new link as gateway in CM to test outbound on
whatever medium i'm changing to. So I would go ahead and add the PRI gateway
and start using it (make a route-pattern for one number so you're not
changing outbound for your entire environment) and once satisfied either
port your DID's (if coming from a different telco) or have you provider
swing the DID's to TDM afterwards. If you're using MGCP, it might be a
little more config on the CM side, but still should be easily done.

Max

On Mon, Jan 17, 2011 at 11:23 AM, Bellerose, Robert <
Robert.Bellerose at analog.com> wrote:

> Anyone have any tips and or instructions for swapping out SIP over internet
> to a standard T1 PRI.
>
> 2811 router off a CCM rel 7.
>
> We have the router side up and ready to go just want to make sure I don’t
> miss anything on the CCM side.
>
> I know the MAC needs to change for the MTP just wondering what else I need
> to do.
>
> Anything is appreciated.
>
> Rob
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110117/c416f916/attachment.html>