[cisco-voip] Admin Vlan ID via DHCP for 7960/40

[Mike King]

I think that your're out of luck.

With Juniper EX switches, you can use LLDP-MED, but you need a minium of
8.3.3 phone load and a phone that supports it to configure a voice vlan.

However, the 7960/40 phones do not support LLDP-MED, Cisco has not announced
any plans to support LLDP-MED on this model phone.

Cisco also, unlike all they're competitors, does not support setting the
Voice Vlan via DHCP either. (I used to manage nortel phones, so I know what
your referring too)

FYI,

I have 7941G-GE's, and 7945's, and they all work flawlessly using LLDP-MED
on the juniper EX switches.

Good Luck
Mike

On Thu, Jan 20, 2011 at 10:16 AM, Klaczko, Edwin <
EdwinKlaczko at sd54.k12.il.us> wrote:

> Is it possible to set the Admin Vlan ID on 7960/40 phones via DHCP?
> Something like option 43 for wireless access points?  I have 7960s at a site
> with Juniper EX switches and the only documentation I see would require me
> to manually set it for each phone.  Someone suggested it might be done this
> way, but I can’t find any docs on the ‘net confirming this.  How is everyone
> configuring these phones with 3rd vendor switches?
>
>
>
> TIA
>
>
>
> Eddie Klaczko
>
> Network Specialist
>
> Schaumburg School District 54
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110120/c7e1af8b/attachment.html>