[cisco-voip] CUCME. INVITE without SDP.

[Peter Slow]

Does make the H323 side use fast start work?

-Peter

2011/1/26 Aleksey Qwerty <russian.qwerty at gmail.com>:
> Thank you for the response...but I pointed out chassis and IOS version on
> purpose. The problem is there is no such function in a current IOS or in the
> latest available IOS version for 3745 chassis.
>
> http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_e1.html#wp1052977
>
> "...сommand was integrated into Cisco IOS Release 12.4(20)T."
>
> Is there other way to change the situation?
>
> Thank you in advance.
>
> 2011/1/25 Peter Slow <peter.slow at gmail.com>
>>
>> early-offer forced
>>
>>
>> http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html#wp1445377
>>
>> https://supportforums.cisco.com/thread/299654
>>
>> -Peter
>>
>> On Tue, Jan 25, 2011 at 8:49 AM, Aleksey Qwerty
>> <russian.qwerty at gmail.com> wrote:
>> > Dear all,
>> >
>> > I'm faced the problem with Cisco 3745, IOS Advanced IP Services
>> > 12.4(15)T3,
>> > CUCME 4.1(0).
>> >
>> > I have the following scheme:
>> > Cisco IP Phone --SCCP--> CUCME_1 --H.323/G.729/alpha-numeric--> CUCME_2
>> > --SIP/G.711ulaw/rtp-nte--> ITSP
>> >
>> > Calls from CUCM_2 to ITSP works just fine, instead of calls from CUCME_1
>> > via
>> > CUCME_2. Calls are not established at all. In debug ccsip messages I can
>> > see
>> > that there is no SDP in INVITE from CUCME_2 to ITSP.
>> >
>> > Here is config of CUCME_2:
>> >
>> > voice service voip
>> >  allow-connections h323 to h323
>> >  allow-connections h323 to sip
>> >  allow-connections sip to h323
>> >  allow-connections sip to sip
>> >  no supplementary-service h450.3
>> >  supplementary-service h450.12
>> >  redirect ip2ip
>> >  fax protocol t38 ls-redundancy 5 hs-redundancy 2 fallback none
>> >  h323
>> >  sip
>> >
>> > sip-ua
>> >
>> > dial-peer voice 1 voip
>> >  description To ITSP
>> >  translation-profile outgoing Cut9
>> >  huntstop
>> >  destination-pattern 9T
>> >  session protocol sipv2
>> >  session target ipv4:192.168.1.1
>> >  session transport udp
>> >  dtmf-relay rtp-nte
>> >  codec g711alaw
>> >  clid strip name
>> >  clid network-number 111222333
>> >  no vad
>> >
>> >
>> > How can I get SDP (some capabilities information) in INVITE message from
>> > CUCME_2?
>> >
>> > Thanks in advance.
>> >
>> > --
>> > BR,
>> > Aleksey Qwerty
>> >
>> >
>> > _______________________________________________
>> > cisco-voip mailing list
>> > cisco-voip at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/cisco-voip
>> >
>> >
>
>
>
> --
> BR,
> Aleksey Qwerty
>
>