[cisco-voip] CUCME. INVITE without SDP.

[Aleksey Qwerty]

Thank you for the reply.

I'm not sure, in fact. But CUCME_1 config looks like:

voice class h323 1
 call start fast

dial-peer voice 1 voip
 description To CUCME_2
 voice-class h323 1

Please help.

26 января 2011 г. 18:57 пользователь Peter Slow <peter.slow at gmail.com>написал:

> Does make the H323 side use fast start work?
>
> -Peter
>
> 2011/1/26 Aleksey Qwerty <russian.qwerty at gmail.com>:
> > Thank you for the response...but I pointed out chassis and IOS version on
> > purpose. The problem is there is no such function in a current IOS or in
> the
> > latest available IOS version for 3745 chassis.
> >
> >
> http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_e1.html#wp1052977
> >
> > "...сommand was integrated into Cisco IOS Release 12.4(20)T."
> >
> > Is there other way to change the situation?
> >
> > Thank you in advance.
> >
> > 2011/1/25 Peter Slow <peter.slow at gmail.com>
> >>
> >> early-offer forced
> >>
> >>
> >>
> http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html#wp1445377
> >>
> >> https://supportforums.cisco.com/thread/299654
> >>
> >> -Peter
> >>
> >> On Tue, Jan 25, 2011 at 8:49 AM, Aleksey Qwerty
> >> <russian.qwerty at gmail.com> wrote:
> >> > Dear all,
> >> >
> >> > I'm faced the problem with Cisco 3745, IOS Advanced IP Services
> >> > 12.4(15)T3,
> >> > CUCME 4.1(0).
> >> >
> >> > I have the following scheme:
> >> > Cisco IP Phone --SCCP--> CUCME_1 --H.323/G.729/alpha-numeric-->
> CUCME_2
> >> > --SIP/G.711ulaw/rtp-nte--> ITSP
> >> >
> >> > Calls from CUCM_2 to ITSP works just fine, instead of calls from
> CUCME_1
> >> > via
> >> > CUCME_2. Calls are not established at all. In debug ccsip messages I
> can
> >> > see
> >> > that there is no SDP in INVITE from CUCME_2 to ITSP.
> >> >
> >> > Here is config of CUCME_2:
> >> >
> >> > voice service voip
> >> >  allow-connections h323 to h323
> >> >  allow-connections h323 to sip
> >> >  allow-connections sip to h323
> >> >  allow-connections sip to sip
> >> >  no supplementary-service h450.3
> >> >  supplementary-service h450.12
> >> >  redirect ip2ip
> >> >  fax protocol t38 ls-redundancy 5 hs-redundancy 2 fallback none
> >> >  h323
> >> >  sip
> >> >
> >> > sip-ua
> >> >
> >> > dial-peer voice 1 voip
> >> >  description To ITSP
> >> >  translation-profile outgoing Cut9
> >> >  huntstop
> >> >  destination-pattern 9T
> >> >  session protocol sipv2
> >> >  session target ipv4:192.168.1.1
> >> >  session transport udp
> >> >  dtmf-relay rtp-nte
> >> >  codec g711alaw
> >> >  clid strip name
> >> >  clid network-number 111222333
> >> >  no vad
> >> >
> >> >
> >> > How can I get SDP (some capabilities information) in INVITE message
> from
> >> > CUCME_2?
> >> >
> >> > Thanks in advance.
> >> >
> >> > --
> >> > BR,
> >> > Aleksey Qwerty
> >> >
> >> >
> >> > _______________________________________________
> >> > cisco-voip mailing list
> >> > cisco-voip at puck.nether.net
> >> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >> >
> >> >
> >
> > --
> > BR,
> > Aleksey Qwerty
> >
> >
>

-- 
BR,
Aleksey Qwerty
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110127/2d4fd1c4/attachment.html>