[cisco-voip] MeetMe Conferencing - choose specific CFB

[Damian Turburville]

Hi,
I am pretty sure you cant do this but I will ask anyway :-)
I have a CUCM 6 cluster (1 Pub, 2 Sub) with various CFB configured, some 
hardware on the PSTN routers (max participants 8) and some software on the CUCM 
servers themselves (max participants 48)
I have a MeetMe range of numbers configured (6301 - 6304) and an MRGL associated 
with my phone that is set to use the HW CFB (max participants 8)
So all of this means that I can setup MeetMe conferences that can take a max of 
8 participants from my phone (I believe the conf bridge is allocated on the 
basis of the configured MRGL for the endpoint that initiates the conf). Now if 
there was a need for a large conference for some reason, I would have to 
associate my phone with a different MRGL so I would access the SW CFB rather 
than the HW CFB when I press the MeetMe button. This would be annoying.
Is there any way of associating the MeetMe number with a specific CFB? i.e. 
could I have 6301 and 6302 using the HW CFB and 6303 and 6304 using the SW CFB?
Cheers,
DT



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110127/ff7b9b67/attachment.html>