[cisco-voip] Unity Connection 8.5 and G.722

[Jason Aarons (US)]

Can Unity Connection 8.5 take calls in both G.722 and G.711? (the data sheets says G.722 is supported) What does it store the message as if you call in with G.722 from a 7945? I don't want any transcoding going on, so I'm assuming in software it does some internal transcoding?

Or is it like Unity or UCCX where during setup you have to specify 1 and only 1 codec ? or is it like a phone where it has a list of codecs advertised?


-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110127/27a05114/attachment.html>