[cisco-voip] Unity Connection 8.5 and G.722

[Paul]

According to the 8xcucdg.pdf (design guide for 8.x)...

Supported recording Codecs:

PCM linear
G.711 mu-law (default)
G.711 a-law
G.729b
G.726
GSM 6.10

So although it advertises G.722...it doesn't store it in G.722. You must choose 
what codec is used for storage.

PCM has the best audio quality but it'll eat your HDD for lunch if you have a 
voicemail heavy environment.




________________________________
From:Jason Aarons (US) <jason.aarons at us.didata.com>
To:"cisco-voip (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net>
Sent: Thu, January 27, 2011 12:17:19 PM
Subject: [cisco-voip] Unity Connection 8.5 and G.722


Can Unity Connection 8.5 take calls in both G.722 and G.711? (the data sheets 
says G.722 is supported) What does it store the message as if you call in with 
G.722 from a 7945? I don’t want any transcoding going on, so I’m assuming in 
software it does some internal transcoding?
 
Or is it like Unity or UCCX where during setup you have to specify 1 and only 1 
codec ? or is it like a phone where it has a list of codecs advertised?
________________________________

Disclaimer:  This e-mail communication and any attachments may contain 
confidential and privileged information and is for use by the designated 
addressee(s) named above only.  If you are not the intended addressee, you are 
hereby notified that you have received this communication in error and that any 
use or reproduction of this email or its contents is strictly prohibited and may 

be unlawful.  If you have received this communication in error, please notify us 

immediately by replying to this message and deleting it from your computer. 
Thank you.