[cisco-voip] VOIP deployment

[neil dsilva]

Which routing protocol you are using ?

Regards,
Neil Dsilva

On Mon, Jan 31, 2011 at 5:48 PM, Just Kennie <justkennie at gmail.com> wrote:

> Hi guys,
> I am in need of swift help, I am a cisco network freak, and found my self
> handling voice in my new company. I have been doing lots of reading on
> voice, but I now I have a major huddle to scale. I will explain the design
> in details and concisely.
>
>    PSTN(12345) - - - - - -(voice-port 0/0/0) CE1 - - - -  PE1- - - - - - -
> - PE2 - - - - -CE2(voice-port 0/0/0)- - - -PHONE(1000)
>
> That is the design above, Layer 2 and Layer 3 are fine.
> The requirement is, when external call called 12345, the call should be
> routed and picked at extension 1000 (PHONE)
> I have built my config (below), please help me look at it, as I don't have
> the full equipment to test across.
>
> CE1
> voice-port 0/0/0
>  connection plar 1000
>  description connected to 12345
>
> dial-peer voice 1 pots
> destination-pattern 12345
>  direct-inward-dial
>  port 0/0/0
>
> dial-peer voice 2 voip
> destination-pattern 1000
>  session target ipv4:20.0.0.2   (CE2)
>
> CE2.........................
>
> voice-port 0/0/0
>  description connected to 1000
>
> dial-peer voice 1 pots
>  destination-pattern 1000
>  port 0/0/0
>
> dial-peer voice 2  voip
>  destination-pattern 12345
>  session target ipv4:10.0.0.2  (CE1)
>
> Please help out in details, I will understand. Thanks!
>
>
> *Cheers,
> Idowu Kehinde
> TEL: 2348024017748
> BB:  30E8E5F9
> *
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110201/50ad908b/attachment.html>