[cisco-voip] CUCM Meet Me option doesn't work

[Ahmed Abd EL-Rahman]

Just a little bit more clarification, the Meet Me conference initiator
must use the Meet Me soft key (which should be added to the soft key
template for the phone) to initiate the meeting on the desired number
from the Meet Me configured range, then afterwards the attendees can
directly dial this number from their phones to join the meeting.

 

HTH

 

 

 

 

 

Best Regards

 

Ahmed Abd EL-Rahman

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of cips
Sent: Saturday, July 02, 2011 1:46 PM
To: 'shary shary'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM Meet Me option doesn't work

 

You have to press the meet-me softkey from the phone and dial the
meet-me number. If this still does not work verify CSS and PT
configuration.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of shary shary
Sent: zaterdag 2 juli 2011 12:30
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM Meet Me option doesn't work

 

I have configured the CUCM basic Meet Me Conference option for 6 people,
required service is active and started and system parameters ae also
configured as per requirement but when i dial the Meet Me Conference
number from my IP Com it gives me busy tone. any idea what am i missing.

 
note: this is a new installation version 7.0.1.x
 

Regards,
Sheeraz Saeed lodhi.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110702/ba34abd5/attachment.html>