[cisco-voip] CUCM Meet Me option doesn't work

shary shary shaary1 at hotmail.com
Sun Jul 3 03:08:26 EDT 2011

I am doing the same thing and after pressing the Meet Me option when i dial the meet me number it gives me busy tone. There is Partition option only in Meet Me and all IP Com and Meet Me have the same Partitiion but still no luck From: cisco at cips.nl
To: shaary1 at hotmail.com; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CUCM Meet Me option doesn't work
Date: Sat, 2 Jul 2011 12:45:39 +0200

You have to press the meet-me softkey from the phone and dial the meet-me number. If this still does not work verify CSS and PT configuration. From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of shary shary
Sent: zaterdag 2 juli 2011 12:30
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM Meet Me option doesn't work I have configured the CUCM basic Meet Me Conference option for 6 people, required service is active and started and system parameters ae also configured as per requirement but when i dial the Meet Me Conference number from my IP Com it gives me busy tone. any idea what am i missing. 
note: this is a new installation version 7.0.1.x

Sheeraz Saeed lodhi. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110703/26bc0271/attachment.html>

More information about the cisco-voip mailing list