[cisco-voip] CUCM Meet Me option doesn't work

[Ahmed Abd EL-Rahman]

Hi Shary,

                You have to assign a CSS to your phone which includes
the partition assigned to the Meet Me pattern.

 

 

 

 

 

Best Regards

 

Ahmed Abd EL-Rahman

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of shary shary
Sent: Sunday, July 03, 2011 10:08 AM
To: cisco at cips.nl; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM Meet Me option doesn't work

 


I am doing the same thing and after pressing the Meet Me option when i
dial the meet me number it gives me busy tone. There is Partition option
only in Meet Me and all IP Com and Meet Me have the same Partitiion but
still no luck 

________________________________

From: cisco at cips.nl
To: shaary1 at hotmail.com; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CUCM Meet Me option doesn't work
Date: Sat, 2 Jul 2011 12:45:39 +0200

You have to press the meet-me softkey from the phone and dial the
meet-me number. If this still does not work verify CSS and PT
configuration.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of shary shary
Sent: zaterdag 2 juli 2011 12:30
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM Meet Me option doesn't work

 

I have configured the CUCM basic Meet Me Conference option for 6 people,
required service is active and started and system parameters ae also
configured as per requirement but when i dial the Meet Me Conference
number from my IP Com it gives me busy tone. any idea what am i missing.

 
note: this is a new installation version 7.0.1.x
 

Regards,
Sheeraz Saeed lodhi.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110703/c2d700e5/attachment.html>