[cisco-voip] New PRI and GW Registration

[Matthew Loraditch]

For MGCP, The PRI will not register until there is active T1 in the port.
You can test this if you want by setting the controller to loopback in the config.
If you are on H.323 the gateway will not ever register.
If you are doing a hot cut and turnup with the new PRI you may want to do the loopback to just validate as much as you can.


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Ruttman
Sent: Tuesday, July 05, 2011 9:31 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] New PRI and GW Registration

Greetings,

We have a new PRI circuit for which we have a "ready for test and turn up" notice.  We've NOT yet done that with the telco.

I've done the CCM config which I believe to be correct.  I assume the router and CM are talking OK as the router's loopback IP address is now on the GW, and all I entered in the config is the hostname and domain, so it must be talking to the router, no?

I've reset the GW in CM, and I did a "no mgcp" and them "mgcp" on the router.

Would you expect that GW to register?  Or will we have to do the test and turn up before the GW can register?  Sorry if my ignorance is showing.

If it could/should register prior to the test and turn up then I need to work on my config.  If not, then I'm good for now and am ready to get with the telco.

Thanks
jeff



CONFIDENTIALITY NOTICE: The information contained in this email including attachments is intended for the specific delivery to and use by the individual(s) to whom it is addressed, and includes information which should be considered as private and confidential. Any review, retransmission, dissemination, or taking of any action in reliance upon this information by anyone other than the intended recipient is prohibited. If you have received this message in error, please reply to the sender immediately and delete the original message and any copy of it from your computer system. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110705/2fd7de56/attachment.html>