[cisco-voip] UC500 Analog Faxes on fxs ports configured with stcapp

[Anthony Kouloglou]

Hi all,
i have a UC540 running CME 7.1 for a year.
All fxs ports are configured with stcapp thus they are registered as 
SCCP devices.
Suddenly, one year later with no problems so far, faxes are coming 
corrupted or not at all while in the same moment, the same fax machine 
can send faxes with no problem!
Is there something i can look in the config?
The guy who supports the fax machine says that there is no problme with 
the device.
Any help will be much appreciated.

BTW: UC50 uptime is 22 weeks.


Best Regards
Anthony
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110705/73947eaf/attachment.html>