[cisco-voip] Disabling CallManager's software MTP to allow routers software MTP to be used?

[Jason Aarons (AM)]

CallManager 8.0(3)

I enabled the  IOS Software MTP on 3945 Gateway and Registered it to CallManager, setup custom MRG/MRGL for that gateway to use that MRGL.

Investigating, as it appears the CallManager server's software MTP is still providing the MTP versus the router CPU.                                                                                                                                                                                                                                                         .

JDCVXMLGWP01#show dspfarm profile 1
Dspfarm Profile Configuration

Profile ID = 1, Service = MTP, Resource ID = 1
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP   Status : ASSOCIATED
Resource Provider : NONE   Status : NONE
Number of Resource Configured : 500
Number of Resource Available : 500
Hardware Configured Resources : 0
Hardware Available Resources : 0
Software Resources : 500
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30
JDCVXMLGWP01#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110708/728338da/attachment.html>