[cisco-voip] CLID/Translation help

[Jay Stants]

Good day everyone, 

Need a little help with configuring outbound caller ID. I've tried a few things 
but i'm missing something in my tanslations that seems to break outbound dialing 
when i change the current translation rule. I want to present my DID on outbound 
calls instead of having whatever number that ITSP routes from presented. Any 
help is much appreciated.

This is what i have currently.

voice translation-rule 1
 rule 1 /^9/ //
 
voice translation-profile voip.ms
 translate called 1
dial-peer voice 1 voip
 description **SIP Trunk to newyork.voip.ms**
 translation-profile outgoing voip.ms
 destination-pattern 9[2-9].[2-9].......
 session protocol sipv2
 session target dns:newyork.voip.ms
 dtmf-relay rtp-nte sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 2 voip
 description **Incoming SIP Trunk - Voip.ms**
 translation-profile incoming voip.ms
 session protocol sipv2
 session target ipv4:10.50.1.2
 incoming called-number 5856786019
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 20 pots
 destination-pattern 5.T
 direct-inward-dial
 no sip-register
!
telephony-service
 max-ephones 10
 max-dn 10
 ip source-address 10.50.1.2 port 2000
 system message Cisco CME 8.1
 cnf-file location flash:
 cnf-file perphone
 time-zone 12
 max-conferences 8 gain -6
 dn-webedit
 time-webedit
 transfer-system full-consult
 secondary-dialtone 9
 create cnf-files version-stamp Jan 01 2002 00:00:00

ephone-dn  1  dual-line
 number 4005 no-reg primary

ephone  1
 device-security-mode none
 mac-address 001E.7AC5.896A
 type 7961GE
 button  1:1

 
Regards,
Jay Stants
jaystants at rogers.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110712/797c6bf5/attachment.html>