[cisco-voip] CLID/Translation help

ccieid1ot ccieid1ot at gmail.com
Tue Jul 12 13:00:54 EDT 2011


Create another translation rule to match your internal number then with your
full e164 number.  You would then create a translation profile using
calling.

Ex

Voice translation-rule 2
Rule 1 /4.../ /9722404\(.*\)/

Voice translation-profile CLID
Translate calling 2
On Jul 12, 2011 7:08 AM, "Jay Stants" <jaystants at rogers.com> wrote:
> Good day everyone,
>
> Need a little help with configuring outbound caller ID. I've tried a few
things
> but i'm missing something in my tanslations that seems to break outbound
dialing
> when i change the current translation rule. I want to present my DID on
outbound
> calls instead of having whatever number that ITSP routes from presented.
Any
> help is much appreciated.
>
> This is what i have currently.
>
> voice translation-rule 1
>  rule 1 /^9/ //
>
> voice translation-profile voip.ms
>  translate called 1
> dial-peer voice 1 voip
>  description **SIP Trunk to newyork.voip.ms**
>  translation-profile outgoing voip.ms
>  destination-pattern 9[2-9].[2-9].......
>  session protocol sipv2
>  session target dns:newyork.voip.ms
>  dtmf-relay rtp-nte sip-notify
>  codec g711ulaw
>  no vad
> !
> dial-peer voice 2 voip
>  description **Incoming SIP Trunk - Voip.ms**
>  translation-profile incoming voip.ms
>  session protocol sipv2
>  session target ipv4:10.50.1.2
>  incoming called-number 5856786019
>  dtmf-relay sip-notify
>  codec g711ulaw
>  no vad
> !
> dial-peer voice 20 pots
>  destination-pattern 5.T
>  direct-inward-dial
>  no sip-register
> !
> telephony-service
>  max-ephones 10
>  max-dn 10
>  ip source-address 10.50.1.2 port 2000
>  system message Cisco CME 8.1
>  cnf-file location flash:
>  cnf-file perphone
>  time-zone 12
>  max-conferences 8 gain -6
>  dn-webedit
>  time-webedit
>  transfer-system full-consult
>  secondary-dialtone 9
>  create cnf-files version-stamp Jan 01 2002 00:00:00
>
> ephone-dn  1  dual-line
>  number 4005 no-reg primary
>
> ephone  1
>  device-security-mode none
>  mac-address 001E.7AC5.896A
>  type 7961GE
>  button  1:1
>
>
> Regards,
> Jay Stants
> jaystants at rogers.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110712/3afef144/attachment.html>


More information about the cisco-voip mailing list