[cisco-voip] CUCM 6.1 and SIP Trunking

David Martin adavidm at gmail.com
Tue Jul 26 10:25:15 EDT 2011


sorry, fixed it now. the software MTP on CUCM was not working correctly.

thanks to Cristobal and Nicholas for their prompt assistance.

Regards

David

On 25 July 2011 09:39, David Martin <adavidm at gmail.com> wrote:

> All,
>
> I am trying to set up a SIP trunk between CUCM 6.1 and Freeswitch. I only
> need calls outbound from Cisco to Freeswitch at the moment but am having
> some difficulties.
>
> The Cisco side never sends an SDP, either in the INVITE or the ACK, and
> Freeswitch needs this to operate. I have tried using "require media
> termination point" and "disable early media" options but there appears to be
> no difference, which is strange. I include a pastebin of the conversation:
>
> http://pastebin.com/T3eqms8N
>
> and a couple of screenshots of the CUCM config for the trunk.
>
> http://img200.imageshack.us/img200/9405/siptrunk.png
>
> http://img191.imageshack.us/img191/3863/sipprofile.png
>
> Any thoughts on where to start looking? I was wondering if CUCM will
> continue to attempt the call if there is a problem with the MTP( I am using
> software MTP on CUCM at the moment). If this is the case then I can see why
> the SDP does not appear in the INVITE (assuming the MTP is broken), but not
> why it does not appear in the ACK.
>
> Thanks in advance.
>
> David
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110726/214cee40/attachment.html>


More information about the cisco-voip mailing list