[cisco-voip] AIM2-CUE not shown in running config of 2811

[Anthony Kouloglou]

On 11/6/2011 8:32 μμ, Doug McIntyre wrote:
> On Sat, Jun 11, 2011 at 10:28:11AM +0300, Anthony Kouloglou wrote:
>> we put a new AIM2-CUE in a 2811 which i upgraded to 12.4.24T5 (ipvoice).
>> This is the minimum IOS needed according to cisco for the combination
>> 2811-AIM2CUE.
>> Well, i can see the module after issuing show diag but the service
>> module interface is not in the running config!!
>> What could be causing that?

>> I've found that sometimes the minimum version isn't always quite the
>> minimum needed to really use it. If there is something newer that
>> fits, I'd definately try that one instead, as the "minimum" usually is
>> buggy out of the gate, and frequently doesn't work.
Hi Doug, thanks for the reply.
the only IOS i can download is 12.4(25e).
All other IOSs, need RAM upgrade to 512MB, and i really can't do that now.
I read cisco's release notes that was clearly noted that minimum IOS is 
12.4.24T.
So, i didn't propose memory upgrade.
What am i going to tell to the customer? That cisco's release notes 
occasionally have errors?
I will give it a shot with 12.4(25e) and let you know.

Anthony