[cisco-voip] AIM2-CUE not shown in running config of 2811

[James Key]

make sure that you have the AIM2 module installed in AIM slot 0.


James Key
________________________________________
From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Kouloglou [akoul at dataways.gr]
Sent: Sunday, June 12, 2011 2:22 AM
To: Doug McIntyre
Cc: ci >> "cisco-voip at puck-nether.net"
Subject: Re: [cisco-voip] AIM2-CUE not shown in running config of 2811

On 11/6/2011 8:32 μμ, Doug McIntyre wrote:
> On Sat, Jun 11, 2011 at 10:28:11AM +0300, Anthony Kouloglou wrote:
>> we put a new AIM2-CUE in a 2811 which i upgraded to 12.4.24T5 (ipvoice).
>> This is the minimum IOS needed according to cisco for the combination
>> 2811-AIM2CUE.
>> Well, i can see the module after issuing show diag but the service
>> module interface is not in the running config!!
>> What could be causing that?

>> I've found that sometimes the minimum version isn't always quite the
>> minimum needed to really use it. If there is something newer that
>> fits, I'd definately try that one instead, as the "minimum" usually is
>> buggy out of the gate, and frequently doesn't work.
Hi Doug, thanks for the reply.
the only IOS i can download is 12.4(25e).
All other IOSs, need RAM upgrade to 512MB, and i really can't do that now.
I read cisco's release notes that was clearly noted that minimum IOS is
12.4.24T.
So, i didn't propose memory upgrade.
What am i going to tell to the customer? That cisco's release notes
occasionally have errors?
I will give it a shot with 12.4(25e) and let you know.

Anthony
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
NOTICE: This electronic mail message and any files transmitted with it are intended
exclusively for the individual or entity to which it is addressed. The message, 
together with any attachment, may contain confidential and/or privileged information.
Any unauthorized review, use, printing, saving, copying, disclosure or distribution 
is strictly prohibited. If you have received this message in error, please 
immediately advise the sender by reply email and delete all copies.