[cisco-voip] last number dialed from an analog fxs phone

[netty]

I still can't find where these details would be - is anyone able to  
confirm that you *can't* find out the last dialed numbers from the  
router itself?

Cheers

Jeff
On 6 Jun 2011, at 15:40, netty wrote:

> I am trying to check the last number an fxs connected device called.  
> Using show voice call we can see some details on the ports, but if  
> is quite limited:
>
> router#sh voice call 0/0/2
> 0/0/2 -          -  -                     vpm level 1 state =  
> FXSLS_ONHOOK
> vpm level 0 state = S_UP
> calling number 303, calling name ANPhones, calling time 06/05 14:32
> router#sh voice call 0/1/1
> 0/1/1 -          -  -                     vpm level 1 state =  
> FXOLS_ONHOOK
> vpm level 0 state = S_UP
> calling number 01232987654, calling name , calling time 06/04 18:51
>
>
> So I can see the last time the fxs device made a call, but not the  
> called number,
> And I can see when the fxo port last received a call and from where,  
> but not when it last made a call or where.
>
> Anyone know if this can be shown?
> The 'sh call history voice' gets overwritten with voip calls  
> quickly, I was too late for that...
> The show dialpeers for ext 303 or the dial-peer number would hit  
> both give the output below, would have been helpful if they were  
> populated :/
> voice class called-number:
>           inbound = `', outbound = `'
>
> It seems sensible to be able to get a last called number out, either  
> from details on the fxs port or on the fxo port but that doesn't  
> mean it can be done...
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip