[cisco-voip] CM interface to LAN

[David Zhars]

Doing a setup for a smaller company, about 180 phones.  Generally I would
see CM plugged into a gig port on a switch but they don't have a gig port.
Do you think I'll run into any trouble with using a 100M port, maybe dual
speed, so I will get close to 200M?
My understanding has always been that there is not a lot of work between the
phones and CM once the system is up, some initial signalling at the start
and end of each call, then it is all handed off to the switches.

Appreciate any thoughts!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110613/fc18c5ef/attachment.html>