[cisco-voip] E164 Advice

[Paul]

you'll probably want to read this carefully before doing anything too rash...

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/dialplan.html




________________________________
From: Russell Chaseling <rchaseling at plannet21.ie>
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Sent: Thursday, June 16, 2011 12:24 AM
Subject: [cisco-voip] E164 Advice


 
Hi guys,
 
I have a new single site small install coming up with UC 8.5 (CM, Presence & Connection) which will be integrated with AD. They have their telephony field in AD poulated with the full E164 number (ie +35315551234). 
 
The Telco (E1) does not accept E164 outgoing and only sends 4-digit called number (ie 1234) for incoming calls.
 
I am looking for advice & gotchas for setting this up as I've never used the full E164 as the telephony field before. 
 
For CM should I translate to E164 on the gateway & have the Phone DNs with the full E164 or just leave it as 4 digit DNs and just do internal translations?
 
Presence & Unity Connection will also be AD integrated.............
 
This is probably simple enough but just have the fear of the unknown & only have a small window to get the up and running so want to avoid as many pitfalls as possible
 
Cheers
Russell
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110616/3b9c355b/attachment.html>