[cisco-voip] Remotely testing ports on an VG-224

[Tim Reimers]

Hi all -

 

Is there any way to remotely check that dialtone is being delivered out
the port on a VG-224?

 

Something like this:

test voice port 0/1/3 si-reg-read 29 1

 

That's what I can do to test for dialtone on a 2801 FXO port -

 

Is there a similar sort of command I can do on a VG-224 to see if it's
delivering dialtone out to the attached copper?

 

I'm trying to figure outwhether I've got blown ports on a VG-224 before
I have to drive forever to get to the site and see if it's a problem in
the VG-224 or a broken wire that is someone else's problem..



 

thanks, Tim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110620/cb5fefc4/attachment.html>