[cisco-voip] Cisco SIP phone 8961 missing "Forwarded Call Information Display" on cucm 8.5

[Ovidiu Popa]

Upgrade to firmware 9.2.1 and it should work.

Regards,
Ovidiu



On Jun 21, 2011, at 11:53 AM, Ki Wi <kiwi.voice at gmail.com> wrote:

> i just upgraded the system from CCM 3.X
>  
> On legacy phones (including CIPC), the usual display is still there. Meaning it will shows "forwarded call by XXXX"
>  
> However on the new SIP phone, it doesn't shows that ... Is this normal? Anyone faced the same issue? If not, I will have to open a tac case again.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip