[cisco-voip] Cisco SIP phone 8961 missing "Forwarded Call Information Display" on cucm 8.5

[Ki Wi]

Ok, thanks!

I actually installed it hoping to fixed the corporate directory issue I faced however it's not so now they are still on 9.1.1 or 9.1.1SR1.

Thanks for the quick reply once again. 

Sent from my iPhone
Pls pardon my fat fingers.

On Jun 21, 2011, at 6:15 PM, Ovidiu Popa <ovi.popa at gmail.com> wrote:

> Upgrade to firmware 9.2.1 and it should work.
> 
> Regards,
> Ovidiu
> 
> 
> 
> On Jun 21, 2011, at 11:53 AM, Ki Wi <kiwi.voice at gmail.com> wrote:
> 
>> i just upgraded the system from CCM 3.X
>> 
>> On legacy phones (including CIPC), the usual display is still there. Meaning it will shows "forwarded call by XXXX"
>> 
>> However on the new SIP phone, it doesn't shows that ... Is this normal? Anyone faced the same issue? If not, I will have to open a tac case again.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip