[cisco-voip] Cisco SIP phone 8961 missing "Forwarded Call Information Display" on cucm 8.5

[Florian Kroessbacher]

the forwarding info goes to the phone, but before 9.2.1 the phone didn't display

----
Florian Kroessbacher
gmail: florian.kroessbacher at gmail.com

Sent from my phone, apologies for any typos.

Am 21.06.2011 um 12:46 schrieb Ki Wi <kiwi.voice at gmail.com>:

> Ok, thanks!
> 
> I actually installed it hoping to fixed the corporate directory issue I faced however it's not so now they are still on 9.1.1 or 9.1.1SR1.
> 
> Thanks for the quick reply once again. 
> 
> Sent from my iPhone
> Pls pardon my fat fingers.
> 
> On Jun 21, 2011, at 6:15 PM, Ovidiu Popa <ovi.popa at gmail.com> wrote:
> 
>> Upgrade to firmware 9.2.1 and it should work.
>> 
>> Regards,
>> Ovidiu
>> 
>> 
>> 
>> On Jun 21, 2011, at 11:53 AM, Ki Wi <kiwi.voice at gmail.com> wrote:
>> 
>>> i just upgraded the system from CCM 3.X
>>> 
>>> On legacy phones (including CIPC), the usual display is still there. Meaning it will shows "forwarded call by XXXX"
>>> 
>>> However on the new SIP phone, it doesn't shows that ... Is this normal? Anyone faced the same issue? If not, I will have to open a tac case again.
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip