[cisco-voip] Cisco Fax Server Outbound Faxes Failing

[Sechaba Mokoena]

Hi,

I have a Cisco Fax Server configured to use a Cisco 2911 as the H323
gateway. I can receive faxes with no problem, but my outbound faxes are
failing. The debug output is as follows:

 Called Party Number i = 0xA1, '0112057584'
                Plan:ISDN, Type:National
Jun 22 10:41:51.255: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8  callref =
0x8110
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
Jun 22 10:41:51.503: ISDN Se0/0/0:15 Q931: RX <- PROGRESS pd = 8  callref =
0x8110
        Progress Ind i = 0x8288 - In-band info or appropriate now available

        Progress Ind i = 0x8282 - Destination address is non-ISDN
Jun 22 10:41:51.603: ISDN Se0/0/0:15 Q931: RX <- PROGRESS pd = 8  callref =
0x8110
        Progress Ind i = 0x8288 - In-band info or appropriate now available

        Progress Ind i = 0x8282 - Destination address is non-ISDN
Jun 22 10:41:51.619: ISDN Se0/0/0:15 Q931: RX <- PROGRESS pd = 8  callref =
0x8110
        Progress Ind i = 0x8288 - In-band info or appropriate now available

        Progress Ind i = 0x8282 - Destination address is non-ISDN
Jun 22 10:41:56.079: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8  callref
= 0x8110
        Cause i = 0x8283 - No route to destination
        Progress Ind i = 0x8288 - In-band info or appropriate now available

        Progress Ind i = 0x8282 - Destination address is non-ISDN
Jun 22 10:41:56.079: ISDN Se0/0/0:15 Q931: call_disc: PI received in
disconnect; Postpone sending RELEASE for callid 0x809C


I can make outbound calls from my IP Phones without any problems using the
same E1. Any suggestions on what the problem could be?

Kind regards,

Sechaba Mokoena
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110622/3e2c7221/attachment.html>