[cisco-voip] 3911 and CUCM 7.15

[Anthony Kouloglou]

Hi,
by pressing **#** ?
can i do it via telnet?O:-)

On 23/6/2011 17:14, Paul wrote:
> did you factory reset the phone already?
>
> If you haven't yet, I'd try that out?
>
> ------------------------------------------------------------------------
> *From:* Anthony Kouloglou <akoul at dataways.gr>
> *To:* "cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
> *Sent:* Thursday, June 23, 2011 6:45 AM
> *Subject:* [cisco-voip] 3911 and CUCM 7.15
>
> Hi all,
> before i go crazy i wanted to share something you:
> i unplugged a 3911 from an old CME and i wanted to register it to a 
> CUCM 7.1.5.
> I entered its MAC and enabled telnet access to it and entered in the cucm.
> I saw it upgrading (via telnet) but it refuses to get registered to 
> the CUCM!!
> I don't know why.
> I can see it's web interface, DNS, TFTP all correct (that is why it 
> upgraded) but not registration at all!!
> I can't even see it's ip in the CUCM admin page.
>
> Please, any help would be appreciated..
>
> Regards
> Anthony
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110623/795a0313/attachment.html>